Accessories
Clock Guards
These sturdy, durable clock guards are the perfect solution for protection against theft or damage. Designed for use with both analogue & digital clocks and easy to install.
- Analogue Wire Guard 16″ (40.64 cm) x 16″ (40.64 cm) Part # 104001
- Analogue Wire Guard – 19″ (48.26cm) x 19″ (48.26cm) Part # 104002
- Digital Guard for 2.5″(6.35cm) 6 Digit Part # 104003
- Digital Guard for 4″ (10.16 cm) 4 Digit Part # 104004
Resources
Analogue Clock Hanger Bracket & Retrofit Bracket
- Hanger Bracket Part # 105007
- Hanger Bracket – Retrofit Part # 105008
Transmitter Shelf
- Transmitter Shelf Part # 105001
Transmitter Rack Mount Bracket
Easy attachment to transmitter for convenient installation into most technology rack systems
- Transmitter Bracket Part # 105003
When designing a clock and bell system there are many accessories that put the finishing touches on a great system. Items such as; clock guards, hanger brackets, transmitter shelf, transmitter rack mount brackets and more.
We offer a variety of clock guards. Clock guards are mainly used for gym clocks to protect the clock from an errant ball. They fit over the entire clock and are made of steel. The steel is thin enough to ensure that the time display can be seen from a distance and different angles yet strong enough to within stand a ball striking it.
We have guards for our analogue 13″ clock and for our analogue 16″ clock. Our 16″ standard clock is the number one clock for use in gymnasiums because of its size. Our Digital LED Clocks that are used in environments where they need to be protected can use the guards specifically design for them.
The guards are simple to install. All that is required is for four corner screws to be tighten down to secure the guard around the clock.
Our hanger brackets and retrofit brackets provide added security and assist when removing an old hard wired clock system. The hanger brackets security element is that the analogue clock must be twisted in a certain direction in order to remove the clock from the wall. This prohibits someone from just reaching up and removing the clock.
The retrofit bracket is excellent for when removing old or failed wired clocks and replacing them with our products. Typically in an installation of old wired clocks there was a metal gang box in the wall behind the clock. The retrofit bracket is design to set into the box so that the clock placement can be centred .
The transmitter shelf and the transmitter rack mount brackets provide the necessary shelving or mounting for the KRONOsync transmitter. The cantilever shelf can easily hold the weight of the transmitter so that it can be mounted to the wall. The rack mount brackets are designed so the transmitter can be mounted in a standard equipment rack.
Our synchronised clocks are used in multiple location types and our accessories are designed to provide the little elements that will make your clock system perfect for your organization.